| WWV319.0 |
Fixed bugs and functions are improved. |
| WWV317.0 |
1. Feature improvement 1) Comply with "Chinese National Standard GB18030-2022*" *It standardized new Chinese font 2. Bug fixes 1) Projector's operation may become unstable when the projector continuously receives control commands right after it receives "PWR ON" command via RS-232C. |
| WWV316.0 |
Fixed bugs and functions are improved. |
| WWV314.0 |
■Scanner Driver update ■Addition of the Touch Unit Setup Manual in the OSD Menu Setting ・This new settings allows the installer to fine tune manually (using the remote controller) the Touch Unit installation. A step by step guide is displayed on the screen. |
| WWV313.0 |
■Error Message Improvement during Touch Unit setup In case of Touch Unit setup failure ・Potential causes are identified and writen On Screen Display ■A bug is fixed about error message when saving data on a Network folder |
| WWV312.0 |
■WLAN update ■Fixed bug about SNMP response |
| WWV311.0 |
■Specification changes ・Addition of 2560x1080/60Hz resolution into EDID seting . Addition of Mouse Button and Status indication into the Interactive Tool bar . Addition of Freeze Button into the Interactive Tool bar (Request to EPSON is mandatory to enable the function) |
| WWV310.0 |
■Touch Mute function improvement When the Touch is muted; as long as the tip of the interactive pen is pressed in the drawing area, the Finger Touch cannot operate. Then an object like a ruler can be used to draw straight lines with a pen. ■Playback improvement with PC Free Function |
| WWV303.0 |
■Improvement with iProjection Enhancement of Search recognition in environments where ・Many computers have got iProjection installed ・[Standby mode] is set to [Communication On] |
| WWV302.0 |
Fixed bugs and functions are improved. |
| WWV301.0 |
Fixed bugs and functions are improved. |
| WWV300.0 |
■Updates to Projector Menus ・Signal I/O The display condition of the [A/V Output] setting is added ・Display Menu A setting value is added to the [No-signal Screen] setting The display condition of the [Home Screen Auto Disp.] setting is added ・Operation Menu The display condition of the [Standby Mode] setting and the [Quick Startup] setting is added ・Network The [Transmitter Settings] are added The [Wireless LAN Sys.] setting is added ■Updates to User Operations ・You can use the Wireless Presentation System to Connect（Windows/Mac Computers） ■Fixed known issue |
| WWV218.0 |
Fixed bug: The projector fails to start at some time. |
| WWV217.0 |
Fixed bugs and functions are improved. |
| WWV216.0 |
Fixed bugs and functions are improved. |
| WWV215.0 |
Fixed bugs and functions are improved. |
| WWV214.0 |
■Improvement to open .pdf file .It becomes possible to open renamed file with extention written in capital letters (.PDF) ■Fixed issues .No HDMI display with some device sources .Not possible to save in .pdf format using the same name of a file already stored .Not possible to save files in particular OSD Settings |
| WWV210.0 |
■Updates to User Operations ・You can use additional Zoom options to change the whiteboard zoom ratio to fit width or fit height during split screen projection. ・You can switch to the whiteboard screen using commands. ■Fixed known issue |
| WWV200.0 |
Fixed several known issues. |
| WWV150.0 |
■Updates to Projector Menus ・Image [Image Preset Mode] setting is added ・Signal I/O [HDMI Out Intensity] setting is added ・Network [Interrupt Connection] setting is added to the [Screen Mirroring] setting ・ECO [Sleep Mode Timer] setting is added [A/V Mute Timer] setting is added ・Initial/All Settings [Firmware Update] setting is added ■Updates to User Operations ・You can use the USB Display feature on macOS 10.15.x（64-bit） ・You can play .mp4/.mov（H.264, H.265）file using the PC Free feature ・You can use two Screen Mirroring sources（Screen Mirroring1 and Screen Mirroring2） ・You can use some additional functions of Screen Sharing feature ■Fixed known issue |
Comments
0 comments
Please sign in to leave a comment.